Sunday, May 28, 2017

About Our Videos

Welcome Viewers. The videos available over here, mostly display the application side of various CAD software like  Autodesk Inventor , SolidWorks, Solid Edge, Siemens NX and Pro E Wildfire/Creo Parametric software. Along with this basic tutorials like getting started, tips and tricks are also available.

In our videos, full sketching and total part/assembly creation is displayed. Addition to this, some of the videos display, the process of creating the animation/simulation of the assemblies for presentation purpose.
 
Almost all the videos are with finished part/assembly files that are available to download from Autodesk 360 site. There are lots of video tutorial available over internet, but very few show full modeling process and provide the file used in the video for free. So grab this golden opportunity and learn these CAD software with an ease, in a new way....

Every video is in full HD so the quality of the content is quite good. The video run in a smooth speed so that it can be followed easily. There no cuts in video so that viewers can each and every step.

By watching our videos any one can observe and learn, proficient techniques that are applied during the 3D model creation.

 
These tutorials related to CAD models which are along with finished files/Drawing Sheets can be utilized as, exercises for practice in the classroom training.
 
We have shown same type of work with various CAD software which is quite beneficial for people who are switching from one software to another.
 
Our Mission:- Promote our skills to find appropriate works for us and help people involved in field of  CAD.


Friday, March 31, 2017

Content List of Videos (Autodesk Inventor)

To search the video of your choice, click “Crtl+F” button on your key board.

3-D Parametric Solid Model Drawing----- highlighted with Red Colour
3-D Parametric Mechanical Drawing----- highlighted with Blue Colour
Video Tutorials with Caption and Audio Narration----- highlighted with Green Colour
Video Tutorials with Caption----- highlighted with Magenta Colour
Machine Part (Practise Exercise) from 2D Sketch-------- highlighted with Black Colour

 

Serial No.

Catalogue of Video Tutorials Uploaded on YouTube & Blog

1

Allen Screwdriver (Autodesk Inventor 2010)

2

Anvil (Autodesk Inventor 2010)

3

Ashtray (Autodesk Inventor 2013)

4

Autodesk Inventor Drive Constraint Tutorial--‘Bevel Gear’ (with caption and audio narration)

5

Autodesk Inventor 2012 Dynamic Simulation Tutorial--‘Bevel Gear’ (with caption and audio narration)

6

Bolt and Nut with Realistic Modeled Thread (Autodesk Inventor 2013)

7

Creating Unified and American screw internal thread profile (Autodesk Inventor)

8

Autodesk Inventor Dynamic Simulation Tutorial--‘Bolt-Nut’ (with caption and audio narration)

9

Bottle-Plastic  (Autodesk Inventor 2015)

10

Autodesk Inventor-Studio Tutorial--‘Box (mini size)’ (with caption and audio narration)

11

Box (mini size) - Autodesk Inventor 2010

12

Bucket (Video Tutorial) Autodesk Inventor 2013

13

Bulb Shade (Autodesk Inventor 2010)

14

Burner (Autodesk Inventor 2010)

15

Calculator (Cabinet) - Autodesk Inventor 2012

16

Autodesk Inventor Modelling and Animation Tutorial--‘Ceiling Hook’ (with audio and  caption)

17

Autodesk Inventor-Studio Tutorial--‘Chain’ (with caption and audio narration)

18

Chisel (Autodesk Inventor 2010)

19

Circular Plate (Autodesk Inventor 2010)

20

Clamp for Girder (Autodesk Inventor 2010)

21

Comb (Autodesk Inventor 2010)

22

Autodesk Inventor-Studio Tutorial--‘Combination Pliers’ (with caption and audio narration)

23

Combination Pliers (Autodesk Inventor 2010)

24

Computer Mouse (Autodesk Inventor 2012)

25

Cot-Wooden (Autodesk Inventor 2012)

26 –A

Door (Panel with Frame) - Volume-1 (Autodesk Inventor 2010)

26 –B

Door (Panel with Frame) - Volume-2 (Autodesk Inventor 2010)

27

Door (Panel with Frame) -Drive Constraint (Autodesk Inventor 2010)

28

Autodesk Inventor-Weldments Tutorial--‘Double Sided Half V-Groove’ (with caption and audio narration)

29

Autodesk Inventor Tutorial--‘Drill Machine’

30

Autodesk Inventor Dynamic Simulation Tutorial--‘Drill Machine’ (with caption and audio narration)

31

Pipe Fittings (Video Tutorial) Autodesk Inventor 2013

32

Ellipsoid (Autodesk Inventor 2012)

33 –A

Emergency Light (Cabinet) Volume-1 (Autodesk Inventor 2012)

33 –B

Emergency Light (Cabinet) Volume-2 (Autodesk Inventor 2012)

34

Eye Wash Cup (Autodesk Inventor 2010)

35

Flower-pot (Autodesk Inventor 2010)

36

Fluorescent Bulb (Autodesk Inventor 2010)

37

Gate Valve (Autodesk Inventor 2012)

38

Gimlet (Autodesk Inventor 2016)

39

Glass (Autodesk Inventor 2010)

40

Grating for Gas Oven (Autodesk Inventor 2010)

41

Hacksaw (Autodesk Inventor 2012)

42

Hammer (Autodesk Inventor 2010)

43

Hand Vise (Autodesk Inventor 2012)

44

Handle of Screw Driver (Autodesk Inventor 2010)

45

Hardware Fittings (Autodesk Inventor 2010)

46

Autodesk Inventor Dynamic Simulation Tutorial--‘Helical Gear-Internal’ (with caption and audio narration)

47

Autodesk Inventor Drive Constraint Tutorial--‘Helical Gear’ (with caption and audio narration)

48

Autodesk Inventor Dynamic Simulation Tutorial--‘Helical Gear’ (with caption and audio narration)

49

Autodesk Inventor Modelling and Animation Tutorial--‘Hinge’ (with caption and audio narration)

50

Hook-Gate Fixture (Autodesk Inventor 2013)

51

Hyperboloid (Autodesk Inventor 2012)

52

Jar-Plastic (Autodesk Inventor 2012)

53

Latch for Shelf (Almirah) Autodesk Inventor 2010

54

Laundry Press (Autodesk Inventor 2010)

55

LED Lamp (Autodesk Inventor 2012

56

Lid of Frying Pan (Autodesk Inventor 2010)

57

Liquid Petroleum Gas Regulator (Autodesk Inventor 2012)

58

Magnetized Pin Box (Autodesk Inventor 2010)

59

Match Box (Autodesk Inventor 2012)

60

Measuring Scale (Autodesk Inventor 2010)

61

Mesh of Table Fan (Autodesk Inventor 2010)

62 –A

Mixer (Cabinet) Volume-1 (Autodesk Inventor 2012)

62 –B

Mixer (Cabinet) Volume-2 (Autodesk Inventor 2012)

63

Mug-Plastic (Autodesk Inventor 2010)

64

Mug-metallic (Autodesk Inventor 2013)

65

 

66

Autodesk Inventor-Studio Tutorial--‘Nose Pliers’ (with caption and audio narration)

67

Nose Pliers (Autodesk Inventor 2010)

68

Nozzle (Autodesk Inventor 2010)

69

Paraboloid (Autodesk Inventor 2012)

70

Peeler (Video Tutorial) Autodesk Inventor 2016

71

Pen Stand (Autodesk Inventor 2010)

72

Pencil (Autodesk Inventor 2010)

73

Pipe Collar (Autodesk Inventor 2010)

74

Autodesk Inventor Tutorial--‘Pipe Wrench’

75

Autodesk Inventor Drive Constraint Tutorial--‘Pipe Wrench’ (with caption and audio narration)

76

Plug-Top (2-Pin) - Autodesk Inventor 2012

77

Plug-Top (3-Pin) - Autodesk Inventor 2012

78

Pressure Cooker (Autodesk Inventor 2012)

79

Autodesk Inventor Drive Constraint Tutorial--‘Rack and Pinion’ (with caption and audio narration)

80

Rectangular Tin Container (Autodesk Inventor 2013)

81

Autodesk Inventor Dynamic Simulation Tutorial--‘Roller Chain’ (with caption and audio narration)

82

Round Bowl (Autodesk Inventor 2010)

83

Round Tin Container (Autodesk Inventor 2013)

84

Screw Driver (Autodesk Inventor 2010)

85

Shaving Razor (Autodesk Inventor 2010)

86

Soap Case (Autodesk Inventor 2010)

87

Socket (Multi Pin) - Autodesk Inventor 2012

88

 

89

Spectacle Case (Autodesk Inventor 2012)

90

Stool (Autodesk Inventor 2010)

91

Strainer (Autodesk Inventor 2010)

92

Switch (Cabinet) - Autodesk Inventor 2012)

93

Autodesk Inventor Dynamic Simulation Tutorial--‘Synchronous Belt’ (with caption and audio narration)

94

Autodesk Inventor-Studio Tutorial--‘Synchronous Belt’ (with caption and audio narration)

95

Table Plastic (Autodesk Inventor 2010)

96

Table-Steel Frame By Frame Generator (Autodesk Inventor 2010)

97

 

98

 

99

Tiffin Box (Autodesk Inventor 2010)

100

Top Cover of Stabilizer (Autodesk Inventor 2010)

101

Autodesk Inventor Modelling Tutorial--‘Tray’ (with caption and audio narration)

102

Tub-Rectangular (Autodesk Inventor 2010)

103

Autodesk Inventor Dynamic Simulation Tutorial--‘V-Belt’ (with caption and audio narration)

104

Ventilator-Steel Frame (Autodesk Inventor 2015)

105

Autodesk Inventor Tutorial--‘Vise’

106

Autodesk Inventor Dynamic Simulation Tutorial--‘Vise’ (with caption and audio narration)

107

Wood Screw (Autodesk Inventor 2015)

108

Autodesk Inventor Drive Constraint Tutorial--‘Worm Gear’ (with caption and audio narration)

109

Autodesk Inventor Dynamic Simulation Tutorial--‘Worm Gear’ (with caption and audio narration)

110

Spherical Surface (Autodesk Inventor 2012)

111

Engine MKII (Video Tutorial) Autodesk Inventor 2016

112

Metal Container (Video Tutorial with Caption) Autodesk Inventor 2016

113

Oil Pan (Autodesk Inventor 2012)

114

2 Bolt Self Aligning Plain Bearing (Autodesk Inventor 2012)

115

4 Bolt Self Aligning PLAIN Bearings (Autodesk Inventor 2012)

116

Bearing Locknut-NE (Autodesk Inventor 2012)

117

Bearing Lock nut Washer (Autodesk Inventor 2012)

118

Twist Drill (Autodesk Inventor 2012)

119

Swing Bar 3-8 Drive (Autodesk Inventor 2012)

120

Socket 3-8 Shallow 12pt (Autodesk Inventor 2012)

121

Wrench (Autodesk Inventor 2012)

122

USB Extender (Autodesk Inventor 2012)

123

Scissor (Autodesk Inventor 2012)

124

Casing-Plastic (Autodesk Inventor 2012)

125

Autodesk Inventor Exploded View Tutorial--‘Vise’ (with caption and audio narration)

126

Parabola from 2D Equation Curve (Autodesk Inventor 2013)

127

Hyperbola from 2D Equation Curve (Autodesk Inventor 2013)

128

Ellipse from 2D Equation Curve (Autodesk Inventor 2013)

129

Deck (Architectural Model) Autodesk Inventor 2012

130

Jar-Glass (Autodesk Inventor 2012)

131

Spoon (Autodesk Inventor 2012)

132

Almirah (Shelf Mini Size) - Autodesk Inventor 2012

133

Pulley with round groove (Autodesk Inventor 2015)

134

Pulley with V-groove (Autodesk Inventor 2015)

135

Square Bend Tube (Autodesk Inventor 2012)

136

Grater (Autodesk Inventor 2012)

137

Modelling and Simulating a Cam and Follower Assembly (Autodesk Inventor 2013)

138

Simulate a Cam and Valve Assembly (Video Tutorial)

139

Reciprocating Saw Dynamic Simulation - Part 1 (Video Tutorial)

140

Reciprocating Saw Dynamic Simulation - Part 2 (Video Tutorial)

141

Windshield Wiper - FEA Using Motion Loads (Video Tutorial)

142

90 Degree M16 Bolt Removal Tool Design (Video Tutorial)

143

Autodesk Inventor Tutorial--‘Split Tool’(with caption and audio narration)

144

Autodesk Inventor Tutorial--‘Browser Bar’(with caption and audio narration)

145

Autodesk Inventor Tutorial--‘Loft feature in 3D sketch’ (with caption and audio narration)

146

Autodesk Inventor Assembly Tutorial--‘Rotate and Place components Tool’(with caption and audio narration)

147

Autodesk Inventor Assembly Tutorial--‘Creating a component Tool’ (with caption and audio narration)

148

Autodesk Inventor Modelling Tutorial--‘Creating hole on a curve surface’ (with caption and audio narration)

149

Autodesk Inventor Assembly Tutorial--‘Creating wires in Mesh of Table Fan’(with caption and audio narration)

150

Autodesk Inventor Tutorial--‘Extrude Tool’ (with caption and audio narration)

151

Fixture Block (Video Tutorial) Autodesk Inventor 2012

152

Mount Bracket (Video Tutorial) Autodesk Inventor 2012

153

Valve Lifter (Video Tutorial) Autodesk Inventor 2012

154

Housing Fixture (Video Tutorial) Autodesk Inventor 2012

155

Hopper Flange (Video Tutorial) Autodesk Inventor 2012

156

Gear Pump Body (Video Tutorial) Autodesk Inventor 2012

157

Alignment Bracket (Video Tutorial) Autodesk Inventor 2012

158

Dovetail Stop Guide (Video Tutorial) Autodesk Inventor 2012

159

Anchor Slide (Video Tutorial) Autodesk Inventor 2012

160

Drill Bit (Video Tutorial) Autodesk Inventor 2012

161

Drive Insert (Video Tutorial) Autodesk Inventor 2012

162

Ratchet Wheel (Video Tutorial) Autodesk Inventor 2012

163

Truss Flange (Video Tutorial) Autodesk Inventor 2012

164

Flanged 90 Elbow (Video Tutorial) Autodesk Inventor 2012

165

Alignment Catch (Video Tutorial) Autodesk Inventor 2012

166

Mini Crank Case (Video Tutorial) Autodesk Inventor 2012

167

Pinch Fit Cap (Video Tutorial) Autodesk Inventor 2012

168

Slip Nut Insert-03 (Video Tutorial) Autodesk Inventor 2012

169

Field Glass Fun (Video Tutorial) Autodesk Inventor 2012

170

Pivot Arm (Video Tutorial) Autodesk Inventor 2016

171

Fly Wheel (Video Tutorial) Autodesk Inventor 2012

172

Elbow Piston (Video Tutorial) Autodesk Inventor 2012

173

Support Base (Video Tutorial) Autodesk Inventor 2012

174

Cylinder (Video Tutorial) Autodesk Inventor 2012

175

Inspection Cover for Sewage System (Autodesk Inventor 2012)

176

Bibcock (Autodesk Inventor 2013)

177

Mounting Bracket (Autodesk Inventor 2012)

178

Create Part from Sketch (Autodesk Inventor 2012)

179

Ashtray (New Design) - Autodesk Inventor 2012

180

Autodesk Inventor Drive Constraint Tutorial--‘Helical Gear (Internal)’ (with caption and audio narration).

181

Autodesk Inventor Dynamic Simulation Tutorial--‘Rack and Pinion’ (with caption and audio narration)

182

Autodesk Inventor Dynamic Simulation Tutorial--‘Pipe Wrench’ (with caption and audio narration)

183

Autodesk Inventor Dynamic Simulation Tutorial--‘Cam and Follower’ (with caption and audio narration)

184

Autodesk Inventor Modelling Tutorial--‘Knob of Switch’ (with caption and audio narration)

185

Can (Autodesk Inventor 2013)

186

Autodesk Inventor Sheet Metal Tutorial--‘Tub-Rectangular’ (with caption and audio narration)

187

Autodesk Inventor Sheet Metal Tutorial--‘Latch’ (with caption and audio narration)

188

Autodesk Inventor Sheet Metal Tutorial--‘Circular Tub’ (with caption and audio narration)

189

Chassis for Automatic Voltage Regulator by Sheet Metal (Autodesk Inventor 2013)

190

Chassis for Constant Voltage Transformer by Sheet Metal (Autodesk Inventor 2013)

191

 Autodesk Inventor Tutorial--‘Extrude tool→Join operation’ (with caption and audio narration)

192

Autodesk Inventor Tutorial--‘Text & Emboss tool’ (with caption and audio narration)

193

Autodesk Inventor Tutorial--‘Creating Tooth of Hacksaw Blade’ (with caption and audio narration)

194

Autodesk Inventor Tutorial--‘Creating a new Part over curved surface of Base part’ (with caption and audio narration)

195

Autodesk Inventor Tutorial--‘Loft tool Ex.1’ (with caption and audio narration)

196

Autodesk Inventor Tutorial--‘Sweep and Shell tool’ (with caption and audio narration)

197

Autodesk Inventor Tutorial--‘Circular Pattern tool’ (with caption and audio narration)

198

Autodesk Inventor Tutorial--‘Sweep & Circular Pattern  tool’ (with caption and audio narration)

199

Autodesk Inventor Sheet Metal Tutorial--‘Contour Flange & Contour Roll tool’ (with caption and audio narration)

200

Autodesk Inventor Tutorial--‘Loft tool Ex.2’ (with caption and audio narration)

201

Autodesk Inventor Tutorial--‘Creating a Notch of Mug’ (with caption and audio narration)

202

Autodesk Inventor Sheet Metal Tutorial--‘Punch tool’ (with caption and audio narration)

203

Autodesk Inventor Sheet Metal Tutorial--‘Face & Flange tool’ (with caption and audio narration)

204

Autodesk Inventor Sheet Metal Tutorial--‘Hem tool’ (with caption and audio narration)

205

Thread Cutting in Bolt and Nut (Autodesk Inventor 2013)

206

Photo Frame (Design-1) Autodesk Inventor 2013

207

Photo Frame (Design-2) Autodesk Inventor 2013

208

Door (Panel with Frame) Modified Design (Autodesk Inventor 2013)

209

Handle of Tack Hammer (Autodesk Inventor 2013)

210

iTwist Drill (Autodesk Inventor 2013)

211

Create a Twist Drill as an 'iPart' through Autodesk Inventor 2013

212

Key of Iron Safe (Autodesk Inventor 2013)

213

iWrench (Autodesk Inventor 2013)

214

Create a Wrench as an 'iPart' through Autodesk Inventor 2013

215

Door of Shelf (Autodesk Inventor 2013)

216

Allen Screwdriver—Double Ended (Autodesk Inventor 2013)

217

Creating Realistic Knurling on the Cylindrical Surface (Autodesk Inventor 2013)

218

Controlling parameters of assembly by using ‘Derived Component’ (Autodesk Inventor 2013)

219

Wine Bottle (Autodesk Inventor 2013)

220

Chain-Inventor Studio (Upgraded Design) - Autodesk Inventor 2013

221

Bathroom Stool-Plastic (Autodesk Inventor 2016)

222-A

Shelf-Wooden for Food Storage (Volume-1) Autodesk Inventor 2016

222-B

Shelf-Wooden for Food Storage (Volume-2) Autodesk Inventor 2016

223

Spoon (Autodesk Inventor 2016)

224

Ladle (Autodesk Inventor 2016)

225

Engine Crank Shaft (Autodesk Inventor 2016)

226

Engine Piston (Autodesk Inventor 2016)

227

Engine Con Rod (Video Tutorial with Caption) Autodesk Inventor 2016

228

Engine Case Rear (Video Tutorial) Autodesk Inventor 2016

229

Engine Head (Video Tutorial) Autodesk Inventor 2013

230

Carb (Video Tutorial) Autodesk Inventor 2016

231

Carb Slide Boot (Video Tutorial) Autodesk Inventor 2016

232

Tuned Pipe (Video Tutorial) Autodesk Inventor 2016

233

Tuned Pipe 2 (Video Tutorial) Autodesk Inventor 2016

234

Flywheel (Video Tutorial) Autodesk Inventor 2016

235

Carb Zip-Tie (Video Tutorial) Autodesk Inventor 2016

236

Clutch Nut (Video Tutorial) Autodesk Inventor 2016

237

Clutch Shoe 2 (Video Tutorial) Autodesk Inventor 2016

238

Engine Rear Cover (Video Tutorial) Autodesk Inventor 2016

239

Engine Sleve Rear (Video Tutorial) Autodesk Inventor 2016

240

Rear Exhaust Manifold (Video Tutorial) Autodesk Inventor 2016

241

Carb Intake Nipple (Video Tutorial) Autodesk Inventor 2016

242

Carb Highspeed Needle (Video Tutorial) Autodesk Inventor 2016)

243

Carb Intake Plate (Video Tutorial) Autodesk Inventor 2016

244

Carb Slide (Video Tutorial) Autodesk Inventor 2016

245

Clutch Bell (Video Tutorial) Autodesk Inventor 2016

246

Flywheel Washer (Video Tutorial) Autodesk Inventor 2016

247

Compression Button (Video Tutorial) Autodesk Inventor 2016

248

Exhaust Manifold Gasket (Video Tutorial) Autodesk Inventor 2016

249

Flywheel Taper Collar (Video Tutorial) Autodesk Inventor 2016

250

Carb Spring (Video Tutorial) Autodesk Inventor 2016

251

Extension Spring 3.873 (Video Tutorial) Autodesk Inventor 2016

252

Miscellaneous Components of 'Engine MKII' (Autodesk Inventor 2016)

253

Wheel (Video Tutorial) Autodesk Inventor 2016

254

Tire-2 (Video Tutorial) Autodesk Inventor 2016

255

Front Lower Arm Brace (Video Tutorial) Autodesk Inventor 2016

256

Front Hub Carrier L (Video Tutorial) Autodesk Inventor 2016

257

Hex Drive (Video Tutorial) Autodesk Inventor 2016

258

E-Clip (Video Tutorial) Autodesk Inventor 2016

259

Front Side Plate R (Video Tutorial) Autodesk Inventor 2016

260

Ball End (Video Tutorial) Autodesk Inventor 2016

261

Front Suspension Adjustment Clip (Video Tutorial) Autodesk Inventor 2016

262

0.1875 Ball stud 0.375 (Video Tutorial) Autodesk Inventor 2016

263

Front Lower Arm (Video Tutorial) Autodesk Inventor 2016

264

Front Upper Arm (Video Tutorial) Autodesk Inventor 2016

265

Front Axel (Video Tutorial) Autodesk Inventor 2016

266

Front Hub Bearing (Video Tutorial) Autodesk Inventor 2016

267

Front Upper Arm Mount (Video Tutorial) Autodesk Inventor 2016

268

Pillow Ball Retainer (Video Tutorial) Autodesk Inventor 2016

269

Front Shock Brace (Video Tutorial) Autodesk Inventor 2016

270

Shock Cartridge (Video Tutorial) Autodesk Inventor 2016

271

Shock Bushing (Video Tutorial) Autodesk Inventor 2016

272

Rear Hub Bearing (Video Tutorial) Autodesk Inventor 2016

273

Suspension_Spring (Video Tutorial) Autodesk Inventor 2016

274

Piston of Suspension (Video Tutorial) Autodesk Inventor 2016

275

Shock Spring Adjustment Nut (Video Tutorial) Autodesk Inventor 2016

276

Spring Cup (Video Tutorial) Autodesk Inventor 2016

277

Shock Body 1.3 Length (Video Tutorial) Autodesk Inventor 2016

278

Pillow Ball (Video Tutorial) Autodesk Inventor 2016

279-A

Miscellaneous Components of 'Suspension' Series-1 (Autodesk Inventor 2016)

279-B

Miscellaneous Components of 'Suspension' Series-2 (Autodesk Inventor 2016)

280

Suspension (Video Tutorial) Autodesk Inventor 2016

281

Scissors-Spring Loaded (Video Tutorial) Autodesk Inventor 2016

282-A

Stapler (Volume-1) Video Tutorial -- Autodesk Inventor 2016

282-B

Stapler (Volume-2) Video Tutorial -- Autodesk Inventor 2016

282-C

Stapler (Volume-3) Video Tutorial -- Autodesk Inventor 2016

283-A

Suspension Fork (Volume-1) Video Tutorial – Autodesk Inventor 2016

283-B

Suspension Fork (Volume-2) Video Tutorial – Autodesk Inventor 2016

284

AC-Motor (Video Tutorial) Autodesk Inventor 2016

285-A

Blower (Volume-1) Video Tutorial -- Autodesk Inventor 2016

285-B

Blower (Volume-2) Video Tutorial -- Autodesk Inventor 2016

285-C

Blower (Volume-3) Video Tutorial -- Autodesk Inventor 2016

286

Tuner (Video Tutorial) Autodesk Inventor 2016

287-A

Test Station (Volume-1) Video Tutorial -- Autodesk Inventor 2016

287-B

Test Station (Volume-2) Video Tutorial -- Autodesk Inventor 2016

287-C

Test Station (Volume-3) Video Tutorial -- Autodesk Inventor 2016

287-D

Test Station (Volume-4) Video Tutorial -- Autodesk Inventor 2016

287-E

Test Station (Volume-5) Video Tutorial -- Autodesk Inventor 2016

287-F

Test Station (Volume-6) Video Tutorial -- Autodesk Inventor 2016

288

Autodesk Inventor Tutorial--‘iTwist Drill’ (with caption and audio narration)

289

Autodesk Inventor Tutorial--‘Front Axel’ (with caption and audio narration)

290

Autodesk Inventor Tutorial--‘Engine Piston’ (with caption and audio narration)

291

Autodesk Inventor Tutorial--‘Carb Intake Plate’ (with caption and audio narration)